Detailed Product Description
FEATURE: 1.High speed: Theoretic speed is up to 400 nips/min. 2.High output: Theoretic output is up to 65kg/g 3.Optimizing: By means of computer design, the equipment is controlled by PLC and 256 colored interface in both Chinese and English. The main motor is drove by transducer. It's a high classed mechanical and electronic textile machinery. 4.High quality: It produces the best combed sliver. 5.High efficiency: The laps can be loaded by pneumatic system automatically. FUNCTION: 1.The nippers are designed to stop in front every time. 2.The crank radius and the nippers' acceleration is reduced which is good for improving speed. 3.The gripping power of nippers can be adjusted by increasing the eccentricity of eccentric wheel on the tension shaft. 4.Using cogged belt drive for supporting rollers transmission makes it more stationery and lowers its noisy. 5.The noisy is lowered by reducing the weight of sliver guide plane. 6.It is equipped a stopping system for preventing winding in drafting system cylinders. 7.The sliver tension can be adjusted by adjusting the variable speed device in can coiler. 8.It owns a pneumatic threading system. 9.Errors can be found immediately by means of eight monitoring sensors for each gathering shoe. 10.The safety switches of international standard and isolated transformer make it reliable to prevent interference and shield. TECHNICAL PARAMETER: Feed lap: Φ650mmx 300mm Feed weight: 50~80g/m Draft range 9~ 19.3 times Mechanical: 400 nips/min Nipper Technological: 250~380 nips/min Theoretic output: 65kg/set.h Output Actual output: 40~ 50/kg/set.h Suction style: center suction Output length: 26.48mm Waste percentage: 5~25 percent Can measure: Φ600mm x 1200mm Compressed air pressure / consumption: 0.6~0.8Mpa/0.8m³/set.h Main motor: 4.7kw 100Hz 2950r/min Brush motor 1.1kw 960r/min Supply voltage three phase 380v Earth line:≥4sq.mm Dimensions: L7180mm x W2120mm x H1920mm Net weight: ≈5100kg
View